Your position: Home > OLT > ZTE OLT

ZTE ZXA10 C220 EPON OLT equipment,Optical Line Terminal,generator room netcore,middle size,better than C200 Multiple interfaces

Item Code: 512387969
Sold: 8
Price:
USD
$1,800.00
PDF Format
    Please select the information you wantX
Wholesale Price:
10
$1,750.00
100
$1,700.00
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
+
-
Units 999 in Stock
  • Description
Specifications

aeProduct.getSubject()

 

aeProduct.getSubject()

 

aeProduct.getSubject()

The following is the EPON board, the model number is EPFC:

aeProduct.getSubject()

The following is the control card, the model number is GCSA, there are 4 RJ-45 ports:

aeProduct.getSubject()

This is the uplink board, the model is EIGM, there are two uplink modules, and also 4 RJ-45 ports:

aeProduct.getSubject()

 

aeProduct.getSubject()

 

aeProduct.getSubject()

 

aeProduct.getSubject()

The following is the bottom of the OLT equipment:

aeProduct.getSubject()

The following is the voltage:-48V, the current is 12A.

aeProduct.getSubject()

The following picture is the port for power supply:

aeProduct.getSubject()

The following is the carton of the OLT equipment:

aeProduct.getSubject()

The pictures below are for the fans, there are 6 small fans included:

aeProduct.getSubject()

 

aeProduct.getSubject()

 

aeProduct.getSubject()

The ports of the fan:

aeProduct.getSubject()

The carton of the fan is as shown below: 

aeProduct.getSubject()

The cables:

aeProduct.getSubject()

 

You can also choose the following one, the same price, some different from the uplink board:

aeProduct.getSubject()

There is 1 EIG board, with 4 modules included on the 4 ports:

aeProduct.getSubject()

C220 configuration:


One service board, the model is EPFC, with four optical ports and four SFP modules;
Two control boards, the model is GCSA, with cable control port, SD memory card ports, etc., as shown.
An EIGM board or EIG board.
A rack fan, it is including six small fans; 48V power connector; UPLINK port and LINK ports.

 

Accessories are:

 

2 pair power lines; 

1 earth cable;

An RJ-45 turns 9-pin male RS-232 network cable; 

A cross-over RJ-45 cable;

2 labels, 24 small ones of each label

The power rating is DC,48---60V,20A, the following link is for the power supply, you need to buy seperately:

 

http://www.aliexpress.com/store/product/Original-Emerson-power-supply-in-cabinet-for-Huawei-OLT-or-ZTE-OLT-48V-20A-power-adapter/208276_622864530.html 

 

C220 is big/middle OLT equipment with high density, high bandwidth and scalable office end equipment of passive optical access. It supports all kinds of FTTx application modes.

 

Features

  • Multiple interfaces to meet requirements of different scenarios
    the system has different kinds of network, service and OAM interfaces, the interfaces are open and compatible.
  • High density and performance design
    Integrate optical access, data switching and route disposal in one shelf, large amount of subscribers are supported, this help save shelf, rack and equipment room, very easy for investment protection and expansion.
  • Carrier class reliability to reduce operation
    Key parts of the system support complete redundancy for active/standby unit. On the other hand, fiber protection is supported to assure access of important users.
  • Operable and manageable to save OPEX
    have good management, monitoring and testing functions for easy maintenance and fault diagnosis. Support local and remote management and terminal management as well.
  • Save energy, low power consumption and harmless materials for green communication
    it has strict control on power consumption, heat dissipation and noise to ensure the least effect on environment.
  • Easy for upgrade and migration
    Support local and remote upgrade, it also supports 10G EPON access through inserting 10G EPON card in the existing shelf, this help protect existing investment and provide more bandwidth to subscribers.

Original equipment from ZTE factory.

 

the following are the related products:

 

aeProduct.getSubject()

ZTE 4 ports EPON board for C200 or C220 OLT. EPFC board with 4 modules

US$ 270.00/piece

 

aeProduct.getSubject()

Original 2 ports ZTE 10G uplink board for C220 EPON OLT. EIT2F for C220 EPON OLT with highest speed,2 ports and one module.

US$ 800.00/piece

 

aeProduct.getSubject()

Original one port ZTE 10G uplink board for C220 EPON OLT. EIT1F for C220 EPON OLT with highest speed,one port and one module.

US$ 700.00/piece

 

aeProduct.getSubject()

Original ZTE 4 ports uplink board for C220 EPON OLT. EIG model with 2 modules included

US$ 160.00/piece

 

 

 

 

 

 

 

 

 

Customer Reviews
Average rating:

5(based on 8 reviews)

Share your thoughts with other customers